Product ID:LUBRIPLATE 930-A
MSDS Date:01/01/1987
FSC:9150
NIIN:01-016-5348
MSDS Number: BGDQY

Emergency Phone: 201-589-9150

Cage: 9N579

Telephone: 419-691-2491

Cage: 9N579

MINERAL OIL,UNSPECIFIED

ACGIH TLV: 5 MG/CUM (MIST)

INORGANIC THICKENER(AS THICKENING AGENT)

ADDITIVES

Effects of Overexposure:EYE:CONTACT MAY IRRITTATE; SKIN:PROLNGD/RPTD.
CONTACT MAY IRRITATE;INGEST:LOW ORDER ACUTE ORAL TOXTY

First Aid:EYE:FLUSH W/CLEAR H*20 FOR 15-MIN. IF IRRITAT. CONTINUES,GET
MED ATTN.; SKIN:REMOVE CONTAMIN. CLOTHNG & WASH THOROUGHLY W/SOAP &
WARM H*20. IF INJECTED UNDER SKIN,GET IMMEDIATE MED. ATTN.;
INHAL:REMOV E TO FRESH AIR; INGEST: GET IMMED. MED.ATTN.

Flash Point:400F/204.4C COC
Lower Limits:1.
Upper Limits:7.
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE OR WATER SPRAY.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:DONOT STORE/MIX W/STRONG OXIDANTS. EMPTY
CONTAINERS RETAIN RESIDUE; DONOT CUT, DRILL,/WELLD!!

Spill Release Procedures:SCRAPE UP GREASE,WASH REMAINDER W/SUITABLE
PETROL. SOLVENT OR ADD ABSORBENT. KEEP PETROL. PRDS. OUT OF SEWERS
& WATER COURSES. ADVISE IF PRODUCT HAS ENTERED OR MAY ENTER SEWERS
& WATER COURSES.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED,LOW
FIRE RISK AREA. PROTECT FROM PHYSICAL DAMAGE.KEEP CONTAINERS
CLOSED. MAINTAIN STANDARD HYGIENE FOR CHEM HANDLING
Other Precautions:AVOID BREATHING OIL MIST. REMOVE OIL-SOAKED CLOTHING
& LAUNDER BEFORE REUSE. CLEANSE SKIN THOROUGHLY AFTER CONTACT.

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:LOCAL EXHAUST TO ELIMINATE MISTS/FUMES/GASES.
Protective Gloves:OIL-RESISTANT
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:USE OIL-RESISTANT APRON, IF NEEDED.
Supplemental Safety and Health
MSDS DATE:5/86(OTH.P/N:930-AAA,930-AA,930-2)

HCC:V6
Boiling Pt:B.P. Text:>550F/>288C
Vapor Pres:<.1
Vapor Density:>5.
Spec Gravity:0.955
Evaporation Rate & Reference:(N-BUAC =1),<0.01
Solubility in Water:INSOLUBLE
Appearance and Odor:SMOOTH, TAN GREASE W/ MINERAL OIL ODOR
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HIGH TEMPERATURES,IGNITION SOURCES
Hazardous Decomposition Products:MAY FORM SO*2; CARBON MONOXIDE, CARBON
DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE

Waste Disposal Methods:ASSURE CONFORMITY W/APPLICABLE DISPOSAL
REGULATIONS. DISPOSE OF ABSORBED MATERIAL AT AN APPROVED WASTE
DISPOSAL FACILITY OR SITE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.